Record your Serato DJ performances as Ableton Live Sets, and play Ableton Live Sets with your turntables or CDJs.
Perform your beats: Drag your Ableton Set onto a Virtual Deck in Scratch Live, then use the Deck to control Ableton Live's tempo and playback.
Ableton View: Live's Session View shows up inside Serato Scratch Live. You can launch clips and scenes, control instruments and effects, mix, mute and solo from within Scratch Live. The Ableton View also syncs automatically with your Akai Professional APC40, APC20 or Novation Launchpad.
Sync Player: Sync your Ableton Live Set to an MP3 in Scratch Live and free up a Deck. Ableton Live locks to the groove and timing of the track on that Deck.
Intelligent audio routing: Ableton Live's audio is intelligently routed to your Serato audio hardware; no secondary audio interface is needed.
Perfect your mixtapes: Record your Serato DJ performance as an Ableton Live Set, complete with song placement and fader movements (Fader and EQ automation is only available when Mixtape is recorded with a Rane TTM 57SL or a Rane Sixty-Eight.) Use Live's collection of effects, instruments and production tools to edit, enhance and polish your mix.
Important Notes: Free for registered owners of Serato Scratch Live hardware and Ableton Live/Suite 8 (and above). You may use The Bridge with the Trial version of Ableton Live, however after 30 days, a license is required to save, export or use The Bridge. The Bridge is not available for Live Lite, Live LE, Live Intro, APC or Launchpad Edition.
To activate The Bridge: Download Scratch Live 2.1.1 and Ableton Live 8.2. Open both programs at the same time with Rane hardware attached to activate The Bridge online.
TTM 57SL Specifications
Parameter : Specification : Conditions & Comments
Analog Inputs: 4 Stereo, Unbalanced RCA jacks:
..........Phono or line level input
..........Phono Response: RIAA ±1 dB, Gain: 30 dB at 1 kHz
..........Max input 133 mV
..........Input Impedance: 47.5k Ω, 200 pF
..........Line Gain: +15 dB to off @ 1 kHz
..........Auxiliary Input: Stereo Unbalanced RCA jacks
..........Gain: Off to +6 dB
FlexFX Return: Stereo Unbalanced 1/4" TS (tip-sleeve) phone jack
FlexFX Send: Stereo Unbalanced 1/4" TS phone jack
Mic Input: Active Balanced: 1/4" TRS (tip-ring-sleeve) phone jack
..........Input Impedance: 511Ω, each leg to ground
..........Gain: 50 dB 1 kHz
..........Frequency Response: 30 to 20 kHz +0, -3 dB, max gain
..........CMMR: >40 dB 1 kHz, max gain
..........S/N: 76 dB Re 0 dBFS, max gain, 20 kHz BW
..........Tone Controls: 2-Band
Master/Booth Outputs: Stereo balanced XLR/TRS jacks
..........Frequency Response 15 Hz to 20 kHz +0, -3 dB
..........THD+N <0.005% re 0 dBFS, 20 to 20 kHz, 20 kHz BW
..........S/N (balanced output) 102 dB re 0 dBFS, A-weighted
Auxiliary Output: Stereo Unbalanced RCA jacks
..........Maximum Input (all inputs): 4Vrms
..........Maximum balanced output (main and booth): 8Vrms
..........Maximum unbalanced output (FlexFx and AUX): 4Vrms
..........Mixer digital audio: 24-bit, 44.1 kHz, 102 dB dynamic range
..........USB digital audio: 16-bit, 44.1 kHz, 102 dB dynamic range
..........Crosstalk: -75 dB re 0 dBFS, 1 kHz
Agency Listing: UL/cUL/CE
Universal Power Supply: 100 to 240 VAC, 50 Hz to 60 Hz
USB Power: Mixer is self-powered.
Unit: Size: 13.3"H x 10"W x 3"D (33.8 x 25.4 x 7.7 cm)
..........Weight: 8.5 lb (3.8 kg)
Unit: Shipping Size: 7.75"H x 12.75"W x 19.25"D (19.7 x 32.5 x 49 cm)
..........Shipping Weight: 12 lb (5.5 kg)
Note: All specifications are typical unless otherwise stated
TTM 57SL Literature
Downloads · Scratch Live 2.3
Scratch Live 2.3
Features in version 2.3:
· Cue Point labels
· 64-bit drivers for Mac
· Pioneer CDJ-350/850 support
WHAT'S NEW IN SCRATCH LIVE 2.3?
- Cue Point Labels
- 64-bit drivers for Mac
- Better software THRU mode indication for the SL 2, SL 3 and SL 4
- Core Audio/ASIO drivers for the SL 3 and Sixty-Eight
- Improved Scratch Live user interface layout for minimum screen resolutions
- Added native support for the Pioneer CDJ-350
- Added native support for the Pioneer CDJ-850
- Support for all current Rane Scratch Live hardware (SL 1, SL 2, SL 3, SL 4, TTM 57SL, Sixty-Eight)
Watch the Scratch Live 2.3 Release notes video.
*The Bridge is free for anyone who owns
- Serato Scratch Live compatible hardware, and
- A registered version of Ableton Live 8.
- Read more about The Bridge.
Minimum System Requirements
Read the minimum system requirements.
Read the full Release Notes for Scratch Live 2.3.0 .
To download previous versions of Scratch Live please visit our Downloads archive.