Please click on the following categories to see complete pull downs of all the Categories.

Sign up for money savings alerts. Enter your email below.

Questions? Comments?
Call Us: (516) 678-4414

Product Details


TTM57SL Discounts Apply !
Recording Store
Previous 1 of 2 (Enlarge) Next

TTM 57SL Mixer

The TTM 57SL Performance Mixer integrates Serato Scratch Live with the best of Rane's hardware. Now you can control Scratch Live from your mixer without touching your laptop!

Navigate through your library, load tracks, hit cues, loop and control effects all from the mixer's control panel.

The features and functionality of your mixer will improve with each new release of Scratch Live software — and all Scratch Live updates are free!

Record your mix directly to hard drive, or record two analog sources simultaneously.

24-bit effects using Rane and Serato's award-winning studio and live sound software technologies, giving you professional studio-quality sound.

Rane's legendary patented magnetic faders are the fastest, most accurate, and longest-lasting on the planet.

Use the TTM 57SL as a high-quality USB audio interface for your favorite Mac or PC software.

• Play a combination of digital and analog sources.
• Play up to two digital files controlled by vinyl or CD while recording your mix.
• Or, digitize two vinyl records or analog sources simultaneously.
• Cue analog and digital sources.
• Operate standalone as a no-compromise performance mixer.

TTM 57SL Mixer

TTM 57SL Mixer <b>Magnetic faders for Channel Faders and Crossfader</b>
<li>Non-contact magnetic position sensor technology.
<li><i>No travel noise - No bleed - Ever</i>! </li>
<li> Independent Contour and Reverse controls for all three faders.</li>
<li>Channel Swap lets the PGM 1 Fader control PGM 2,
the PGM 2 Fader control PGM 1, and reverses the Crossfader.</li>
</ul> <b>Min in an additional Aux Line Input source from the rear panel RCA jacks</b> <b>Mic Input with On switch, Level control and Low/High Tone controls.</b> <b>Headphone Cue Monitor includes Cue balance, Main Mix select and Level Control.</b> <b>Meter switch
toggles between Dual Mono Cueing and Stereo House.</b> <b>Two Input Buses</b>
<li> PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital 2 </li>
<li> PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital 2 </li>
<li> All analog inputs are phono or line switchable.</li>
<li> Input Gain and Left/Right Pan controls.</li>
<li>3-band, full cut Tone controls with band Kill switches.</li>
</ul> <b>Additional "soft" mixer controls used by Scratch Live & internal effects</b>
<li> Footswitch input (Inputs on Tip & Ring; footswitch not included) </li>
<li> Deck 1-2 control switch </li>
<li> Group switch to recall section presets</li>
<li> B1 - B6 programmable switches </li>
<li> P1 - P2 programmable Encoders with push switches </li>
<li> J1 - J2 programmable Joysticks with push switches </li>
</ul> <b>Three sets of Outputs, each with independent Level controls</b>
<li> Main Out on XLR (balanced) </li>
<li>Booth Out on 1/4" TRS (balanced) </li>
<li> Auxiliary Out on RCA (unbalanced) </li>

  • Internal LFO Filter and Echo Effects with six possible insert points
    • Pre- or Post-channel faders for Program 1 and Program 2
    • Main Mix
    • Auxiliary Input Bus
  • 8 Channels of Streaming Audio
    • 16 bit / 44.1 kHz Streaming Audio
    • Four channels from computer
      • Stereo source Digital 1 and Digital 2
    • Four channels to computer
      • Stereo Record 1 and Record 2
  • Stereo Recording
    • Record 1 and Record 2 may record:
      • Pre- or Post-channel faders for Program 1 or Program 2
      • Main Mix
      • Auxiliary Input Bus
  • Vinyl / CD Control Inputs
    • Stereo Record 1 may be used for 4-channels of control
    • Select Analog 1 or Analog 2 for Control Input 1
    • Select Analog 3 or Analog 4 for Control Input 2
  • USB firmware updates
  • Internal universal switching power supply (100-230 VAC)
  • Unit size: 13.5"H x 10"W x 4"D (34.3 cm x 25.4 cm x 10.2 cm)
  • Weight: 8.5 lb (3.8 kg)
  • Shipping Size: 7.75"H x 12.75"W x 19.25"D (19.7 cm x 32.5 cm x 49 cm)
  • Weight: 12 lb (5.5 kg)

Serato Scratch Live

Scratch Live 2.1

Scratch Live supports all these file formats: Fixed and Variable Bit Rate MP3, AIFF, AAC, ALAC, WAV, OGG Vorbis, CD Audio and direct from the mixer. Record from your Mic and immediately scratch as if it was on vinyl. Record direct from vinyl or CD and save as 16-bit 44.1 kHz stereo file.

Easily import your playlists and iTunes library. You can drag from Explorer (Windows) or the Finder (Mac) into the Scratch Live library. The crate and subcrate system helps organize your library and sets. Hot-swap external drives with fast automatic library merging and retention of crates. Browse your music collection by album, artist, BPM, or genre, with optional album art display. Intuitive search function can be applied to any field to find things quickly. Edit ID3 tags with full Unicode support.

Preprocessing of MP3 files is not required except to detect corrupt files or use the auto-BPM and auto-gain functions. Auto-BPM detects tempo information for tracks without it, saving it with each file. A tap tempo button allows you to enter your own. Auto-gain lets you set a target gain on any or all songs in your library. You can also manually adjust individual gain, remembered in each song file.

The Virtual Deck shows everything about the speed and position of a track. As the vinyl rotates, so does the line on the label. The circular progress bar around the edge is a visual representation of the position within the song. The time and remaining time are displayed in minutes and seconds. The turntable speed as a percentage of pitch shift is on the left, and the pitched BPM is on the right.

Different operating modes can be assigned to each Virtual Deck:
Absolute Mode — exact reproduction of record movement, needle drop through tracks – just like normal vinyl. The beginning of the track is mapped to the start of the record.
Relative Mode — skip-free scratching, jump to cue points, and pitch bend buttons combined with turntable control. This mode observes the relative forward and backward movement of the record, but does not regard the position within the record.
Internal Mode — mix with just your laptop using features modeled on DJ CD players. Rewind, Bend down, Play / pause reverse, Play / pause forward, Bend up, Fast forward.
Auto mode — play a sequence of tracks automatically.

With Key Lock on, the key or pitch of the song stays locked at what it would be if the track was playing at normal speed, regardless of the platter speed of the turntable or CD player. Key Lock has scratch detection, so it automatically turns off when scratching for a natural scratching sound.

Variable zoom waveforms centered around current position display horizontally or vertically. Waveforms are colored by frequency so you can distinguish instruments visually. Full track overview lets you quickly find where the beat drops, find breakdowns and choruses, and jump to any part of the song. The tempo display assists with rapid tempo matching of tracks. When the two tracks are matched to the same tempo, the peaks will line up. Beat display emphasizes the transients in tracks -- these are matched up when the two tracks are beat matched. Visual markers can be set for up to 5 cue points per song and triggered from the keyboard. Save up to 9 loops per track -- these loops are saved in the file, and will be present when you reload. Censor expletives on the fly with an instant quick-reverse and catch-up with no loss of timing or pitch.

MIDI control can interface USB controllers with Scratch Live. DJ controller support will vary. Check the notes at for supported controllers.

Built-in help and tips in multiple languages are accessible anytime. There is even a low power warning when running off a laptop battery.

Two Digital Effects Processors are installed in the TTM 57SL mixer so they are available even when Scratch Live is not running. Effects may be synced to BPM and include echo, sweeping filters, phasing and flanging. The “soft” section of controls has multiple functions for controlling Scratch Live from the matched physical controls on the TTM 57SL. They also assign the Internal Digital Effects when the mixer is operated stand-alone without a computer. Six different preset groups optimize common controls for playback, cue/looping, effects, recording and library. You can customize any control or assign to MIDI with a right-click. Footswitch controls are mapped here as well.

Why Scratch Live is the Number One Solution for Professional DJs

  • Exceptional tracking: Unique Serato NoiseMap™ technology (non-timecode).
  • Most stable & lowest latency of any digital vinyl system.
  • Exceptional sound: Pro phono preamps and galvanic isolation.
  • The best customer support on the planet.
  • No hidden costs: full version included.
  • Free software updates.
  • Free music at
  • Serato's Video-SL software plug-in (sold separately)

Scratch Live is licensed exclusively to Rane.


Serato Scratch Live

Computer Requirements

PLEASE NOTE: These are the minimum requirements to run Scratch Live. For best performance and for use in professional situations we recommend you buy a higher spec computer. We also recommend Intel processors (see Note 4 below).


  • 1 GHz G4
  • 2 GB RAM*
  • 1024 x 768 screen resolution
  • OSX 10.4.11 or higher (See Note 2)
  • Available USB port (USB 2.0 required for SL 3, SL 4 & Sixty-Eight)


  • Intel processor, 1.6 GHz or better (See Notes 3 and 4)
  • 2 GB RAM*
  • 1024 x 768 screen resolution
  • Windows XP with Service Pack 3 or higher
  • Windows Vista with Service Pack 2 or higher
  • Windows 7
  • Available USB port (USB 2.0 required for SL 3 & Sixty-Eight)

*If you have a large library, you will benefit from having more RAM.

Note 1: If you are using Scratch Live 2.0's more system intensive features such as DJ FX and are having issues, you may need a higher spec computer for best results, or make sure you have optimized your system: Windows 7 and Vista / Mac OS X.

Note 2: If you are planning on using HID devices on Mac OSX 10.5 (Leopard), then you must use OSX version 10.5.6 or up. HID devices include Rane mixers such as the Rane Sixty-Eight or TTM 57SL and some 3rd party controllers such as the Pioneer CDJ-400, CDJ-900, or CDJ-2000 CD players.

Note 3: Please read this FAQ if you are looking at buying a computer with an AMD processor: Problems with PCs using AMD processors.

Note 4: Please read this FAQ if you are looking at buying a Windows based PC with an Intel i-series processor: Problems with Windows based PCs with i3, i5 or i7 processors when used with USB 1.1 devices.

TTM 57SL Mixer Setup

TTM 57SL Setup

The TTM 57SL easily connects with your turntables, CD players and MIDI controllers.

Control Vinyl Spares

black recordContinuous control signal on vinyl allows smooth accurate scratching. Scratch Live has the lowest latency vinyl emulation system on the market. It has advanced vinyl groove and stylus modeling algorithm for a sound indistinguishable from the real thing.

Innovative positioning system allows fast and accurate needle dropping. The record has thin marks every minute, and a thicker mark every 5 minutes (played at 33 RPM). These marks assist you when using needle dropping to move through the track.

The Vinyl Scroll track allows you use your turntable or CD to scroll through your crate and pick the next song without touching your laptop.

Two copies of black vinyl are included with the TTM 57SL. Side A: 10 minutes, plus Vinyl Scroll track. Side B: 15 minutes.

Control CD

Control CDTwo 15-minute control CDs are included with the TTM 57SL.

The Scratch Live Control Tone, the audio pressed on Scratch Live Control Vinyl and the Control CDs, is copyright 2004-2011 Serato Audio Research. The creation of personal backups of the Control CD is allowed, however duplicating Control CDs for commercial benefit is strictly prohibited. For avoidance of doubt the duplication or creation of Control Vinyl for any use is strictly prohibited. Please respect our copyright. ©2004-2011 Serato Audio Research.

TTM 57SL Record Utility

rec 57This utility helps set your TTM 57SL recording settings when using the 57 as a sound card.

Windows Version

There are two installers. The full install complete with Microsoft .NET Framework 2.0 (huge download) and an "application only" installer for users who already have the framework installed (small download).

Determine if you already have Microsoft .NET Framework 2.0 (min):
Start menu > Control panel > Add or Remove Programs.
If Microsoft .NET Framework 2.0 or higher is listed then download the app-only version. If it is not, download the full version.

TTM 57SL Record (if you don't have .NET installed, 27MB)
TTM 57SL Record (if you already have .NET installed, 370k)

To Install:
Unzip the file to your desktop (or known location) and run setup.exe.

To Run:
Start menu > All Programs > Rane Corporation > TTM 57SL Record Utility

Macintosh Version

Requirements: 10.4 or higher

TTM 57SL Record.dmg (1MB)

To Install:
Double-click the .dmg file, double-click the package file.

To Run:
Applications > Rane Corporation > TTM 57SL Record Utility

The Bridge

Record your Serato DJ performances as Ableton Live Sets, and play Ableton Live Sets with your turntables or CDJs.

The Bridge in Serato Scratch Live

Perform your beats: Drag your Ableton Set onto a Virtual Deck in Scratch Live, then use the Deck to control Ableton Live's tempo and playback.

Ableton View: Live's Session View shows up inside Serato Scratch Live. You can launch clips and scenes, control instruments and effects, mix, mute and solo from within Scratch Live. The Ableton View also syncs automatically with your Akai Professional APC40, APC20 or Novation Launchpad.

Sync Player: Sync your Ableton Live Set to an MP3 in Scratch Live and free up a Deck. Ableton Live locks to the groove and timing of the track on that Deck.

Intelligent audio routing: Ableton Live's audio is intelligently routed to your Serato audio hardware; no secondary audio interface is needed.

Perfect your mixtapes: Record your Serato DJ performance as an Ableton Live Set, complete with song placement and fader movements (Fader and EQ automation is only available when Mixtape is recorded with a Rane TTM 57SL or a Rane Sixty-Eight.) Use Live's collection of effects, instruments and production tools to edit, enhance and polish your mix.

Important Notes: Free for registered owners of Serato Scratch Live hardware and Ableton Live/Suite 8 (and above). You may use The Bridge with the Trial version of Ableton Live, however after 30 days, a license is required to save, export or use The Bridge. The Bridge is not available for Live Lite, Live LE, Live Intro, APC or Launchpad Edition.

To activate The Bridge: Download Scratch Live 2.1.1 and Ableton Live 8.2. Open both programs at the same time with Rane hardware attached to activate The Bridge online.

TTM 57SL Specifications

Parameter : Specification : Conditions & Comments
Analog Inputs: 4 Stereo, Unbalanced RCA jacks:
..........Phono or line level input
..........Phono Response: RIAA ±1 dB, Gain: 30 dB at 1 kHz
..........Max input 133 mV
..........Input Impedance: 47.5k Ω, 200 pF
..........Line Gain: +15 dB to off @ 1 kHz
..........Auxiliary Input: Stereo Unbalanced RCA jacks
..........Gain: Off to +6 dB
FlexFX Return: Stereo Unbalanced 1/4" TS (tip-sleeve) phone jack
FlexFX Send: Stereo Unbalanced 1/4" TS phone jack
Mic Input: Active Balanced: 1/4" TRS (tip-ring-sleeve) phone jack
..........Input Impedance: 511Ω, each leg to ground
..........Gain: 50 dB 1 kHz
..........Frequency Response: 30 to 20 kHz +0, -3 dB, max gain
..........CMMR: >40 dB 1 kHz, max gain
..........S/N: 76 dB Re 0 dBFS, max gain, 20 kHz BW
..........Tone Controls: 2-Band
Master/Booth Outputs: Stereo balanced XLR/TRS jacks
..........Frequency Response 15 Hz to 20 kHz +0, -3 dB
..........THD+N <0.005% re 0 dBFS, 20 to 20 kHz, 20 kHz BW
..........S/N (balanced output) 102 dB re 0 dBFS, A-weighted
Auxiliary Output: Stereo Unbalanced RCA jacks
General Specifications:
..........Maximum Input (all inputs): 4Vrms
..........Maximum balanced output (main and booth): 8Vrms
..........Maximum unbalanced output (FlexFx and AUX): 4Vrms
..........Mixer digital audio: 24-bit, 44.1 kHz, 102 dB dynamic range
..........USB digital audio: 16-bit, 44.1 kHz, 102 dB dynamic range
..........Crosstalk: -75 dB re 0 dBFS, 1 kHz
Agency Listing: UL/cUL/CE
Universal Power Supply: 100 to 240 VAC, 50 Hz to 60 Hz
USB Power: Mixer is self-powered.
Unit: Size: 13.3"H x 10"W x 3"D (33.8 x 25.4 x 7.7 cm)
..........Weight: 8.5 lb (3.8 kg)
Unit: Shipping Size: 7.75"H x 12.75"W x 19.25"D (19.7 x 32.5 x 49 cm)
..........Shipping Weight: 12 lb (5.5 kg)
Note: All specifications are typical unless otherwise stated.

TTM 57SL Literature

  Downloads · Scratch Live 2.3

Scratch Live 2.3

Features in version 2.3:
· Cue Point labels
· 64-bit drivers for Mac
· Pioneer CDJ-350/850 support


  • Cue Point Labels
  • 64-bit drivers for Mac
  • Better software THRU mode indication for the SL 2, SL 3 and SL 4
  • Core Audio/ASIO drivers for the SL 3 and Sixty-Eight
  • Improved Scratch Live user interface layout for minimum screen resolutions
  • Added native support for the Pioneer CDJ-350
  • Added native support for the Pioneer CDJ-850
  • Support for all current Rane Scratch Live hardware (SL 1, SL 2, SL 3, SL 4, TTM 57SL, Sixty-Eight)

Watch the Scratch Live 2.3 Release notes video.

*The Bridge is free for anyone who owns

  • Serato Scratch Live compatible hardware, and
  • A registered version of Ableton Live 8.
  • Read more about The Bridge.

Minimum System Requirements

Read the minimum system requirements.

Release Notes

Read the full Release Notes for Scratch Live 2.3.0 .

Download archive

To download previous versions of Scratch Live please visit our Downloads archive.


Price: $1449.00

« Previous | Next »

Credit Card Processing