We’re Putting Our Foot Down.
Zoom’s G3 Guitar Effects and Amp Simulator combines the ease of a stompbox pedalboard with the power of a multi-effects processor and USB audio interface. With complete control over individual effects and amp modeling, you can change your tones on the fly in both stage and studio settings.
Three stomps. One pedal.
The G3 offers three large stomps with LCD displays and corresponding footswitches that form a graphical interface, allowing you to utilize up to three stompbox and amp effects simultaneously. The interface has also been simplified with three control knobs for each display. This intuitive design makes creating, saving and rearranging the effect chain of your own sounds a breeze and provides easy navigation in live and studio settings.
Evolution of tube amp simulation.
A newly developed sigmoid curve clipper re-creates the smooth clipping of a tube amp’s waveform. With its tube distortion, the G3 can simulate amplifier sounds, including clean, crunch and full-gain drive tones that are authentic to the original models while maintaining the nuances of picking and strumming.
Super-real amp modeling.
The G3’s 13 super-real amp models range from vintage heads to the latest trends in amp technology, each with its own distinct cabinet modeling that can be used to alter its tone characteristics. By combining amplifiers and cabinets, you can digitally design your own custom rig. The G3’s modeling technology provides the best tone for both live performance and direct recording.
Note: Only one amp model can be used at a time.
94 total stompbox models.
The G3 has 94 diverse types of stompbox effects, including some of the world’s most popular guitar pedals and rack-mounted processors. You can use up to three effects in any combination. The G3’s wide range of effects includes distortion, compression, modulation, delay and reverb. Its HD Reverb uses DSP power to produce a rich resonance that rivals outboard gear used in professional studios and live setups.
Note: Only two effects can be used in combinations that feature amp models or HD Reverb.
The newest generation of DSP: ZFX-IV.
The all-new ZFX-IV DSP effects processor boasts amazing power and clarity, upgrading everything from sound to functionality and operability over previous ZFX versions. By using 32-bit floating-point processing, the G3 can produce amplifier sounds that are more realistic than ever before.
Over 100 versatile effects on-board.
Select from over 100 built-in DSP effects to create your own sounds on the G3. Try its renowned compression and wah pedals, chorus effects with stunning depth and resonant reverbs. Or let your tonal imagination run free with dynamic flangers, tremolos, harmonized pitch shifters, multi-tap delays, reverse delays and much more. The G3 can store up to 100 of your original creations without a hitch.
Looper function with 40-second phrase recording/overdubbing.
The G3’s Looper capabilities include 40 seconds of phrase recording and overdubbing. The “sound-on-sound” function allows you to layer guitar sounds as many times as you want in real time and use looped sounds as simple backing tracks. You can even create a “full band” feel with the built-in drum machine and DSP effects for a live solo.
Note: When the UNDO/REDO function is enabled, the recording time is limited to 20 seconds.
Your personal drummer.
Every guitar player needs a drummer, and with the G3 you can choose from 40 different rhythm patterns, including 4, 8 and 16-beat, shuffle and many others. The tap key also makes it easy to set tempo and start a one-man jam session anytime.
USB audio interface for DAW recording.
The G3 operates as an audio interface, letting you record directly to your computer via USB.
All of your sound settings used during rehearsals or live performances can be recorded to your favorite DAW such as the included Steinberg Sequel LE recording software. The pedal’s direct monitoring capability eliminates any latency issues, assuring realistic studio conditions and hassle-free operation.
Balanced XLR output for DI use.
With its built-in XLR output, you can avoid DI boxes completely and directly connect the G3 to any mixing console and maintain a balanced, high quality signal. Its convenient Pre/Post switch can direct an effected sound to the main outputs while sending the original analog guitar signal directly to the XLR output without passing through an A/D converter.
Add a G3 to your pedalboard.
The G3 is perfect for use in combination with traditional stompboxes. By adding a G3 to your pedalboard, you will decrease the size and complexity of your setup, while expanding your system’s effects and modeling capabilities.
Accurate, real-time Tuner function.
The pedal’s Tuner function offers smooth, real-time response with precise guitar tuning accuracy. Whether you’re in the middle of a performance or practicing alone in your room, simply hold down the pedal’s center footswitch to start getting your strings back in tune. In addition, the G3’s LCD displays and LED indicators make the Tuner easy to see on a dark stage, where you can also mute the output for tune silently.
Runs on batteries, AC adapter or USB power.
The G3 can operate on three different power sources: AC adaptor (included), batteries or USB bus power when plugged into your computer. Four AA/LR6 alkaline batteries provide over six hours of continuous use. Whether on stage or in the studio, the G3 gives you reliable power options.
Super-low noise design.
The G3’s "noise floor" of -100dBm virtually eliminates background noise and the ZNR noise reduction removes feedback and other unwanted sounds, providing you with clear tones, along with natural decay and reverb tails.
World's fastest patch change speed: 1ms.
With the G3’s amazing 1ms patch change speed, you will never miss a beat. Change from rhythm playing to a solo in an instant by simply tapping a switch.
Optional expression pedal and footswitch.
Connect an optional FP02 expression pedal to the G3 and control effect parameters such as wah, pitch shift, volume, drive gain, modulation rate and delay/reverb mix in real time. Use an optional FS01 footswitch to tap the tempo used for the drum machine, looper and effects. You can also use an FS01 to mute the Delay/Reverb input or turn Delay Hold on or off.
Free Edit&Share software for Mac/PC.
Zoom’s Edit&Share software, which is available as a free download for the G3, allows you to create, edit and save your personalized amp and effect settings on your computer. Use its “radar charts” to access visual representations of each preset’s tone characteristics, amp/effect sorting feature to easily locate your sounds and drag-and-drop options to rearrange patches for editing purposes. With Edit&Share, you can download the latest patches online, as well as share your patches with others.
We’re putting our foot down with the first pedal to unite traditional analogue stomps with a multi-effects processor and amp simulator: G3.
- Three large LCD displays with intuitive amp and stompbox interface
- 13 amp or 94 stompbox models can be used in any combination
- Over 100 built-in ZFX-IV DSP effects
- Create and store up to 100 original tones
- Looper function with 40 seconds of phrase recording and overdubbing
- Integrated drum machine and auto-chromatic tuner
- USB audio interface for DAW recording
- Balanced XLR output and selectable modes for DI use
- Over six hours of operation using four AA batteries/USB bus power (AC adapter included)
- Includes Edit&Share and Steinberg Sequel LE recording software